Titan Logo

Flagpole Kits, Flags, & Accessories

Wind Resistant up to 95 MPH   |   Easy to Use   |   Made in USA

Flagpole Farm

HOME OF THE TITAN TELESCOPING FLAGPOLE

Featured Products

Flagpole Farm is headquartered in Meridian, Idaho, with an additional operation in Paynesville, Minnesota. We are proud to manufacture the “Titan” line of products, which include the Titan Telescoping Flagpole, and the Titan Solar Light. We also offer a complete line of commercial flagpoles that can be shipped anywhere in the continental United States.

Frequently asked questions

It’s super easy! Installation typically takes approximately an hour. The Titan Telescoping Flagpole
Kit includes the ground sleeve needed for installation. The ground sleeve is made of ABS plastic,
which holds up to whether elements much better than PVC pipe. To install, you simply dig a fence
post size hole that is 28” deep x 14” in diameter. You’ll need about 240 lbs of concrete and a small
amount of pea gravel (4” at the base of the hole). Detailed installation instructions (with pictures)
are included in the Kit.

Our 20’ & 25’ heavy duty poles are good in winds up to 95 mph (with up to two flags not larger than
4’x6’ attached). Our lighter duty 15’ & 20’LT poles are good in winds up to 75 mph (with up to two
flags not larger than 3’x5’ attached).

Except for the concrete, the Kit comes with everything you need to get your pole installed and
operational. It comes with one Titan Telescoping Flagpole (assembled), a Premium Nylon US Flag
with sewn stars and reinforced box stitching at the fly end (4’x6’ for 20’ & 25’; 3’x5’ for 15’ & 20’LT),
the Gold Ball Ornament, and the Ground Sleeve necessary for installation. In addition, every Titan
Telescoping Flagpole is pre-equipped to fly up to two flags.

20’ – Installed height is 20’. It is rated for 95 mph winds. The base is 3.0” in diameter, with a 12-
gauge wall thickness. It is a 4-section pole (3 joints). The pole comes with a premium 4’x6’ Nylon US
Flag.
20’LT – Installed height is 18.5’. It is rated for 75 mph winds. The base is 2.5” in diameter, with a 14-
gauge wall thickness. It is a 3-section pole (2 joints). The pole comes with a premium 3’x5’ Nylon US
Flag. The LT is an abbreviation for light duty.

Tubes – The anodized aluminum tubes will not rust, nor will they scratch or chip like a
painted or powder coated pole. The base section of the 20’ & 25’ poles are 3” in diameter
and have a 12-gauge wall thickness. The base section of the 15’ and 20’LT poles are 2.5” in
diameter and have a 14-gauge wall thickness.


Swivel Rings – All of our flagpoles are equipped to fly two (2) flags. The flags attach to a spring clip
which is attached to a Swivel Ring system. This allows the flags to rotate 360° around the pole to
help prevent wrapping.


Lexan Plastic – The internal interlocking sleeve mechanism, together with the swivel rings are a
Lexan plastic material. Lexan is a polycarbonate resin thermoplastic. In layman’s terms, it is
extremely strong, and can withstand extreme temperature variations.


Half-Staff – To fly your flag at half-staff, simply move the flag from the top position to the lower
position on your flagpole. Extend the pole to its full height. You’ll be at a perfect half-staff position.


Mobility – With our installation process, only the ground sleeve that comes with the pole is
permanently installed in the ground. Accordingly, you have the flexibility to take your pole with you
should you ever move. Moreover, you can take the pole with you for outings such as a camping trip
or tailgate party. Mounts are available for those purposes. Finally, if you know extreme weather is
on the way, you can remove the pole from the ground sleeve and store it in a safe spot until the
weather passes.

Our biggest differentiator is the patented internal interlocking sleeve mechanism that we use to raise,
lower, and lock the pole into place. This interlocking sleeve mechanism makes it very easy to raise
and lower each section, while providing outstanding stability at each joint once it is locked into place.
Most others use either a “screw-in” or a “push button” system at each joint. Those systems tend to
be less reliable over time, as they are more likely to succumb to windy conditions, or they simply
become faulty through normal wear and tear.

The single biggest reason is that you never have to worry about getting to the top of the pole again.
The top retracts down to you. All the headaches associated with replacing the rope, fixing the pully,
or adding an ornament to the top of the flagpole are eliminated with a telescoping flagpole. There are
also many other factors that favor the telescoping flagpole such as price, ease of use, and mobility.

Customer Reviews

Justin Sorensen
Justin Sorensen
2023-08-24
Extremely friendly and helpful. All of your flag needs in one place.
Janet Kulm
Janet Kulm
2023-08-23
Love your store!! We got everything we needed
David Whooley
David Whooley
2023-08-13
They make excellent flag poles. I bought mine at a fair a few years ago. It looked great out in front of my house in W. WA. When we moved to the Tri-Cities a few years ago, I bought a new ground sleeve so I could bring the pole with me. It has performed wonderfully during our windy periods. Top notch customer service. You can’t go wrong buying from this company.
Robert Petty
Robert Petty
2023-05-27
Everything thing u need for flags.
Skip Critell
Skip Critell
2023-03-17
Helpful staff & great selection.
Skip Critell
Skip Critell
2023-03-02
Helpful & knowledgeable staff.
MarvNJulie Bosveld
MarvNJulie Bosveld
2022-11-22
Customer service and ordering was a breeze. Received in a timely manner. Now I have a 13 year old pole that works as a new one. All parts fit. Thanks for everything!!!!!
Scroll to Top